How to Select CNC Side-Hole and Component-Processing Equipment
Do not choose CNC side-hole or component-processing equipment from spindle or axis count alone. Start with the workpiece, required operations, material, dimensions, tooling and processing sequence. Those inputs determine which product page is relevant for a configuration discussion.
Start with the workpiece and process
The current CNC Side Hole Drills category contains equipment for several workflows. Use the stated application on each page as a routing guide, not as a promise that any machine suits every component.
- CKZ-350 Dual-Axis CNC Side Hole Drill: panel-furniture side-hole drilling and common connector processing.
- CKZ-380B Four-Axis CNC Side Hole Drill: panel-furniture side-hole and horizontal-hole processing.
- CKZ-380D Six-Axis CNC Side Hole Drill: hardware fittings, connectors, slots and handle processes stated on its product page.
- KHM-610 Door, Wall & Cabinet Machining Center: drilling-and-milling work for door, wall and cabinet components.
- SM3100 Four-Spindle Solid Wood Mortising Machine: solid-wood mortising workflows.
- MSJ-2800 Four-Spindle Door Lock & Hinge Machine: door lock holes, door closers and hinge processing.
Check the documented working envelope
Compare the required workpiece travel with the stated machine page before requesting a quotation. The figures below are transcribed from current product pages; confirm the final configuration with the drawing and actual process requirement.
| Product | Documented X / Y / Z working stroke | Stated workflow |
|---|---|---|
| CKZ-350 | 2800 / 50 / 50 mm | Panel-furniture side holes and connectors |
| CKZ-380B | 2800 / 120 / 50 mm | Panel-furniture side holes and horizontal holes |
| CKZ-380D | 2800 / 120 / 50 mm | Hardware fittings, connectors, slots and handles |
| KHM-610 | 3050 / 120 / 70 mm | Door, wall and cabinet drilling and milling |
| SM3100 | 2800 / 150 / 100 mm | Solid-wood mortising |
| MSJ-2800 | 2800 / 150 / 70 mm | Door locks, closers and hinges |
Prepare a usable configuration brief
Provide a representative drawing or sample, material, workpiece dimensions, required operations, processing sequence, tooling requirement and required output. This helps verify the relevant configuration rather than selecting from a headline specification.
For solid-wood mortising requirements, see the four-spindle mortising machine buyer guide. For this product group, return to the CNC Side Hole Drills category and open the product page matching the stated process.
FAQ
Should axis or spindle count decide the machine by itself?
No. Start with the workpiece and required process, then verify travel, material, tooling, process sequence and final configuration.
Can the listed working strokes be used as a final quotation?
No. They are the documented values on the current product pages. Confirm the final configuration against the drawing and actual processing requirement.
What should be supplied for a configuration discussion?
Provide a drawing or representative sample, material, dimensions, required operations, processing sequence, tooling requirement and desired output.
Need help matching a workflow to a machine page? Contact Wood Machinery Network with the workpiece information above.
Why One Good Sample Is Not Enough: First–Middle–Last Inspection for Decorative Profiles
Why Edge Banding First Changes Decorative Moulding Production
HK640 Crawler Edge Banding Machine
HK690 Narrow-Edge Banding Machine Overview