Tag: Repair Center

Learn how to adjust air pressure for edge bander tracking units and how stable pneumatic control improves trimming and corner quality.

Learn why panel squareness must be checked before edge banding and how out-of-square panels can create trimming, feeding, and corner defects.

Learn why soft OSB panels can cause edge banding quality problems and how material density, pressure, and support affect the final edge.

Learn how excessive floating clearance affects edge bander panel control and why unstable contact can cause edge quality defects.

Learn why loose locking nuts can make edge bander corner chipping return after adjustment and how to stabilize settings during production.

Learn how to diagnose corner chipping during end cutting on an edge banding machine by checking timing, pressure, clearance, and panel stability.

Learn how buffer valve adjustment affects edge bander end trimming stability and how factories can reduce impact, vibration, and repeated defects.

Learn why edge tape deviation should be fixed before changing glue, trimming, scraping, or buffing settings on an edge banding machine.

Learn how to adjust the buffing unit when edge banding finish quality is poor and how to avoid over-polishing, corner damage, and residue.

Learn how loose screws in an edge bander pressing assembly can create unstable pressure, poor bonding, and repeated edge quality problems.